Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Folsom, CA
Chimney repair in Folsom usually comes down to two things: age and geology. Many homes in the Historic District and along Sutter Street still carry original masonry chimneys that have survived since the Gold Rush era, and the dry, hot summers here harden old mortar faster than homeowners expect. We’re Chimney Sweep Arden-Arcade, and we’ve served Folsom since 2017. Whether it’s a cracked flue tile found over American River Canyon or a rusted damper in a 1998 tract home near Blue Ravine Road, we show you what we find and fix it with material that belongs on a chimney, not a shelf at a hardware store. Call (833) 589-9906 when something looks wrong up top.
Why Folsom Homes Are Different
Folsom is two housing generations stacked on top of each other. The 95630 ZIP has rows of 1990s and 2000s production homes, most with prefabricated metal fireplaces that need their own style of cleaning and have specific failure points. The 95671 and 95763 ZIPs, especially from the Historic District south toward the river, hold older custom homes with true masonry chimneys and clay tile liners. Those liners crack. It’s the single most common repair we do here, and it’s often not from overuse but from the reverse: a chimney that gets lit four or five times a year gets ignored the other 360 days. Dry heat bakes the crown, winter rain seeps into the freeze-thaw cracks, and small seismic shifts along the American River corridor separate flue tiles from the chimney structure. In Folsom, disuse causes more structural damage than creosote ever does. That changes the way we inspect.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Folsom Services
Most Folsom homeowners call us for one of two reasons: a fireplace that hasn’t been swept in years, or a dryer that suddenly takes two cycles to dry a load. Both are fire hazards. Both are handled by our crew without a referral to anyone else.
Chimney Sweep in Folsom
A sweep in Folsom is straightforward, but the prep work matters. We check for cracked flue tiles, separated mortar joints, and animal nests before we ever put a brush up the flue. With our camera gear, you’ll see the inside of your chimney the same way we do, which matters in older Folsom homes where hidden defects hide behind clean fireboxes. The full breakdown of our cleaning, inspection, and what we document for you is on our dedicated Chimney Sweep in Folsom page.
Dryer Vent Cleaning in Folsom
Dryer vents clog with lint and, in Folsom’s newer neighborhoods, construction debris that accumulated during the original build. If your dryer is running hot to the touch or your laundry room feels humid after a cycle, that’s a vent problem, not a dryer problem. We clean the full run from the dryer to the exterior termination point, and we use a camera to verify the line is clear when we’re done. Details, including what we find inside typical Folsom dryer runs, are on our Dryer Vent Cleaning in Folsom page.
Chimney Repair in Folsom
Chimney repair in Folsom splits between two failure modes we see across nearly every neighborhood. In the Historic District and older river-area homes, soft Gold Rush-era brick spalls under decades of dry heat, and flue tiles separate from the chimney body after years of minor seismic movement. In the 1990s and 2000s production homes of 95630, the more common problem is a cracked chimney crown or a corroded metal cap that lets water straight down into the firebox. Both are repairable, and we stock the materials to do the work the same week. Our Chimney Repair service covers the full structural scope: flashing, crowns, caps, and complete liner replacements.
Chimney Cap Installation
Signs you need it
You can see rain, leaves, or bird droppings inside the firebox, or you hear animals moving above the damper at night.
What it costs in Folsom
A standard chimney cap installation in Folsom typically runs $175 to $400 depending on the flue size and whether a custom bracket is needed.
How we do it
We measure the flue, cut or size a cap to match, secure it with mechanical fasteners, and seal the joint so it doesn’t rattle in Folsom’s winter wind.
Chimney Cap Replacement
Signs you need it
Your existing cap is rusted through, missing screens, or has pulled loose from the flue and sits tilted.
What it costs in Folsom
Replacement caps run about $150 to $350, plus any masonry repair needed if the old cap damaged the crown when it moved.
How we do it
We remove the old cap, wire-brush the flue top, inspect the exposed crown, then mount the new cap and seal it against Folsom’s wet winter months.
Chimney Liner Installation
Signs you need it
Your clay tile liner has cracked, spalled, or separated enough to let heat and exhaust reach the chimney structure, or you’re switching to a gas insert and need a properly sized liner.
What it costs in Folsom
Liner work in Folsom averages $2,500 to $5,500 depending on the flue height, the liner material, and whether the old clay tiles must be broken out first.
How we do it
We camera the flue, spec the correct DuraFlex liner for the appliance and flue dimensions, then pull it through, insulate as required, and connect it to a properly terminated cap.
Chimney Flashing Repair
Signs you need it
You have a water stain on the ceiling near the chimney, or the flashing is pulled up, corroded, or missing where the chimney meets the roofline.
What it costs in Folsom
Flashing repair usually runs $300 to $700 in Folsom, though the total climbs if roof decking or masonry has already been damaged by the leak.
How we do it
We cut back the old flashing, install new step and counter flashing, and seal everything with a material that handles Folsom’s hot-to-wet seasonal swings without cracking.
What Chimney Repair Costs in Folsom
| Item | Typical range in Folsom |
|---|---|
| Chimney cap installation | $175 – $400 |
| Chimney cap replacement | $150 – $350 |
| Chimney liner installation | $2,500 – $5,500 |
| Chimney flashing repair | $300 – $700 |
Does a cracked flue tile actually need to be fixed in Folsom?
Yes, and sooner than you’d think. Heat and exhaust move through the flue, not the masonry around it. A cracked or separated tile lets that heat reach the chimney body, and in Folsom’s older homes that’s often all that separates a small repair from a chimney fire. Call (833) 589-9906 to schedule an inspection and get a straight answer.
How long does a chimney repair take in Folsom?
Most cap, crown, and flashing repairs are done in a half day. A full liner replacement can run one to two days depending on access and whether old clay tiles need to be removed. We confirm the exact scope with a camera before we write the quote, so you’re not surprised later.
Brands We Service in Folsom
We run our trucks with the same parts certified chimney specialists trust nationwide. Our crew works with Olympia Chimney, Famco, Copperfield, and DuraFlex, and we stock common cap, flashing, and liner components locally so a typical Folsom repair doesn’t wait on a distributor. See what we use and why on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Folsom, CA
| Service | Typical range in Folsom |
|---|---|
| Chimney sweep | $180 – $340 |
| Dryer vent cleaning | $130 – $250 |
| Chimney cap installation | $175 – $400 |
| Chimney cap replacement | $150 – $350 |
| Chimney liner installation | $2,500 – $5,500 |
| Chimney flashing repair | $300 – $700 |
| Chimney crown repair | $250 – $600 |
| Bird or animal removal | $200 – $500 |
Prices in Folsom push toward the upper end when we’re working on steep roofs in the older river-area homes, when the flue needs scaffolding, or when damage from a long-ignored leak has spread into the surrounding masonry. Every job gets a written flat price before we start, so the number on the quote is the number on the invoice. No hourly surprises, no add-ons after the fact.
Neighborhoods We Serve in Folsom
Our trucks cover all of Folsom, including ZIP codes 95671, 95630, and 95763. We work frequently in the Historic District and the Sutter Street area, across the 1990s tract homes near Blue Ravine Road and Broadstone, and through the newer developments east of Empire Ranch. Most jobs are scheduled within the week, and a typical service visit runs about 45 to 90 minutes.
- Historic District and Sutter Street
- Broadstone and Empire Ranch
- Blue Ravine Road corridor
- American River Canyon neighborhoods
- Tract home subdivisions of 95630
Service Area – Cities Near Folsom
We run this same crew and the same equipment into the surrounding Sacramento-area communities. If you’re in Citrus Heights, CA or Rancho Cordova, CA, the repair scope and price structure don’t change. We also cover Roseville, CA and Antelope, CA for chimney repair, sweeping, and dryer vent work. Same flat pricing, same camera-first standard, same DuraFlex and Olympia Chimney parts on the truck.
Serving Folsom, CA – Our Local Coverage Area
We’re based in the Folsom area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Folsom
Most cap, crown, and flashing repairs in Folsom do not require a permit because they’re considered maintenance. A full liner replacement or structural masonry rebuild may trigger a permit depending on the scope and the home’s historic status. We’ll tell you during the estimate call whether your project needs city sign-off and can point you to the right Folsom office.
We schedule most Folsom appointments within five to seven business days. If you’re preparing for a home inspection, a sale, or a particular cold snap, call (833) 589-9906 and ask for the next available slot. We keep a short wait list for cancellations in the 95630 and 95671 ZIPs.
Yes, and that’s the practical move. Folsom homes with gas dryers and wood-burning fireplaces hold two of the leading residential fire-risk systems in one structure. We’ll clean and camera both systems in one visit, and you get one invoice. It’s the same flat-rate structure whether we do one or both.
Need a chimney repair in Folsom, or want a sweep before the weather turns? Call Chimney Sweep Arden-Arcade at (833) 589-9906 for a free estimate. We’ll put a trained technician on the roof, show you the camera footage, and give you a straight answer on what needs work now and what can wait.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Folsom Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Emily Lin"No complaints. Job's been holding up fine."
- Jennifer Delaney"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Adam Thompson